Roborock S5 General Maintenance
1.Unscrew side brush and remove to clear trapped hair
2. Place side brush back in place and screw it in tightly.
1. Pull out the main brush and remove hair in the bristles
2. Use the tool to cut hair trapped in edges
Pull out the omnidirectional wheel
Use a pair of tweezers to pry out the omnidirectioal wheel.
Push down on the tire until the metal disk poops out.
Remove any tapped hair, and add few drops of olive oil then reassemble.
Sensors and charging contacts
Wipe clean all sensors using a dry, lint-free cloth
Wipe clean all charging contacts.
Replace water filter element every 1-3 months, depending on water quality and mopping frequency.